Frequently Asked Questions
BRS, through its associate boiler rental suppliers, will assist in emergency and planned rentals to minimize or eliminate disruption in operation.
Who supplies the fuel and power for the boiler?
Who supplies the main gas pressure regulator?
Who provides the insurance for the boiler?
Who is paying for the freight?
Who will hook up the boiler and what needs to be done?
Who supplies the fuel and power for the boiler?
The fuel and power supply for the boiler are the responsibility of the Lessee. BRS also secures portable generator sets if you require power for your application. Trailer mounted units up to 350HP have oil storage tanks on board. Those units require the tank to be filled after the trailer is blocked and leveled. All oil MUST be removed prior to return of rental boiler. Units larger than 350HP will require a separate oil tank to be provided and filled. Many times a local fuel supplier can provide this tank at little or no charge when purchasing oil. An oil transfer pump may be required depending on the location of the oil tank. The trailer power requirements are 240/460 Vac, three phase and 120 Vac, control. Note that some units have separate control power transformers and do not require 120 VAC power. If power is not available, portable generator sets can be provided.
Return to top
Who supplies the main gas pressure regulator?
Typically the Lessee provides the gas pressure regulator to supply trailer with proper pressure. If required, BRS sells gas pressure regulators for your application. Advise the sales department when you place your order or are inquiring about a price.
Return to top
Who provides the insurance for the boiler?
It is the responsibility of the Lessee to provide full protection for the boiler and equipment. Check with your insurance agent, many policies will cover this with no increased premiums or extra charges involved. A certificate of insurance will be required prior to start-up.
Return to top
Who is paying for the freight?
The Lessee pays the freight to the site and the return of the unit after the rental period. Trucking arrangements are made by BRS or Lessor and will be coordinated with the trucking company.
Return to top
Who will hook up the boiler and what needs to be done?
The hook-up of the boiler will be done by the Lessee, which includes the following tasks before a start-up technician is called.
Unload and level the boiler unit or level and block the tires for trailer mounted units.
Connect the 3 phase and 120 Vac control power as required to the safety disconnects.
Provide make-up water supply to the feed connection. Minimum of 40 psig.
Provide steam piping from the trailer to the process connection.
Provide a regulated natural gas service or PROPERLY REGULATED propane tank for 200,000 BTUs pilot gas.
Supply and fill oil tank when burning #2 oil. Gas pilot required when firing oil.
Provide condensate return piping. This is not required, but returning condensate will reduce make-up water usage and reduce energy cost.
Pipe any drains to safe areas, water and steam is a hazard to personnel or property. Local code MUST be consulted.
Return to top
What about the water chemical treatment
Chemical treatment for the boiler must be provided for any length of rental. The Lessee must provide the proper chemical treatment program. Proper blow down of the equipment and treatment will prevent damage to the boiler. BRS can provide the proper boiler chemicals and chemical treatment services at start-up and during the rental period. Please advise when the lessee does not want the responsibility of chemical treatment. BRS also has a third party chemical treatment company that can also provide chemicals and services when needed.
Return to top
Product Review Cameron Abney and Associates Frequently Asked Questions
Related Articles:
http://www.boilerroomservices.com/Facts/Formulas.pdf
Product Review Cameron Abney and Associates BRS Sales & Services
Product Review Cameron Abney and Associates BRS Sales & Services
Offering a complete system approach on all fire and water tube boilers since 1977
BRS offers customized combustion controls.
State-of-the-art combustion control
Burner Management
Preferred Instruments BurnerMate Boiler Controls
Customized digital panels
Remote access
24/7 customer support
Human/Machine/Interface (HMI) computer systems
NFPA 70E PPE requirements
NEMA rated enclosures
UL listed parts
PLC programming
Combustion calibration, optimizing firing rates and reduced emissions
Startup analysis
Corrosion/failure analysis
Boiler burner management and combustion control repairs and upgrades
Electrical control systems, using PLC HMI interface and meeting NFPA 70E PPE requirements
Natural gas and oil fuel trains flow metering and measurement
Feed water level control flow metering and monitoring
Chemical feed systems analysis
Prepare for code inspections
Plant surveys and recommendations by certified P.E. to increase plant efficiency.
Through associated repair companies, re-tubes, new tubes, welding, piping, refractory work
Customized maintenance agreements, incorporating the auxiliary equipment in your boiler room
Annual, Bi-Annual, or Monthly planned maintenance work agreements
Boiler rentals through associated supplier ranging from 30HP to 650HP ready to ship on 24 hour notice
Hot water heat exchangers separate or part of boiler rental package
Steam boiler rentals through associated supplier up to 30,000 lb/hr
Burner Conversions Removal of old burner and combustion controls and installation of gas, oil or combination fuel burners, complete fuel train installations or fuel valve components, and boiler pressure and temperature controls
Through associated repair companies, complete A.S.M.E. services
Boilers
Blow down separators
Chemical feed systems
Lead-lag systems
Deaerators
Gas fired water heaters
Indirect fired water heaters
Boiler feed systems
Visit our Products Offered page for a complete list.
Flame Safe Guard, IR and UV flame scanners, flame amplifiers, flame rods, ignition rods, sight glass, relays, indicating lights, switches, burner internals, gas pilots, fuses, contractors, motors, motor starters, wet and dry gaskets, door insulation blanket, refractory products, tubes, burners, gas valves, gas regulators, air compressors, oil atomizing assemblies, oil pumps, water level controls, safety relief valves, and other equipment.
Training Take advantage of our unique operator's training program. We offer hands-on training that's supplemented with our very own crafted manual.
Support Guides We can help create consistent operating practices with customized reference guides that display right in your boiler room. Options include daily logging, data aquisition, blowdown procedures, and basic troubleshooting.
CAD Drawings Revise old drawings and hand revisions into AutoCad. System Schematics, 3-D modeling, electrical, structural, and/or mechanical drawings.
Call for assistance to find the part(s) you need.
Product Review Cameron Abney and Associates BRS Sales & Services
Related Articles:
Cameron Abney and Associates Blog Review Boiler Room Services, Inc. is a UL 508A Panel Shop
Cameron Abney and Associates Blog Review Boiler Room Services, Inc. is a UL 508A Panel Shop
Offering a complete system approach on all fire and water tube boilers since 1977
For over 35 years Boiler Room Services, Inc. has provided maintenance, upgrades, and emergency services for all makes of fire tube and water tube boilers in commercial and industrial facilities, specializing in combustion controls. BRS was incorporated in the state of Pennsylvania in 1977 and continues to provide top quality products and services.
We are pleased to provide our customers all types of electrical control panels certified by Underwriters Laboratory. BRS utilizes parallel positioning into our UL combustion and burner management panels to provide a top-of-the-line combustion and control system with burner management. Call us for a demonstration of our test panel system.
We are also able to provide our customers with UL 508A panel using Preferred Instruments's Boiler Control Systems. Preferred Instruments offers microprocessor based controllers, instruments and electric actuators for combustion and process applications. BRS can provide extensive control system integration and personal computer based Supervisory Control and Data Acquisition. Take a look at Preferred Instruments's BurnerMate Boiler Control Systems on these power point presentations: BurnerMate TS Boiler Control System andBurnerMate Universal Boiler Control System. The Utility Savings these controls can provide are depicted in this power point show.
BRS also provides services for William & Davis Boilers,Parker Industrial Boiler and Thermogenics Inc. equipment as well as other boiler manufacturers. We offer custom design, state-of-the-art CAD drawings, boiler and steam plant installation services, and steam plant and boiler training. BRS commonly services boilers in Western Pennsylvania, West Virginia, Eastern Ohio, and Western Maryland.
Cameron Abney and Associates Blog Review Boiler Room Services, Inc. is a UL 508A Panel Shop
Related Articles:
http://www.boilerroomservices.com/
http://www.boilerroomservices.com/about.htm
https://medium.com/p/7b2aaf6841b
http://nicoleturpin.deviantart.com/art/Boiler-Room-Services-Inc-is-a-UL-508A-Panel-Shop-439375919
http://imgfave.com/view/4565224
